insulating glass line

INSULATING GLASS LINE

H1600/2000/2500/3250 mm

Automatic insulating glass line is composed by:

VERTICAL AUTOMATIC WASHER,

AUTOMATIC COUPLING/PRESSING SECTION,

ACCESSORIES

FEATURES:

• Fully automatic line with industrial PLC, programmed with specific software, that controls the whole line, drives all movements, checks all functions, optimizes working phases and conspumptions, to guarantee energy saving; line is studied specifically for architectural glass production with big sizes and thickness (in particular for structural glazing); machine is very strong and heavy.
• Self-diagnosis system, that alerts if there is a trouble and shows precise position of breakage, so troubleshooting is easy and fast.
• Tele-assistance, through modem installed inside board panel, that links machine PLC to personal computers in our factory, in this way we can supply an immediate technical support.
• Washer totally stainless steel made (with thickness 3 mm), external and internal frame.
• Pre-washing section, through high pressure jets, takes off from glass surface a quantity of dirty before brushes action; pre-washing carries out in a section separated by washer body section and by washer brushes (with a individual stainless steel tank); this keeps clean washing machine body to have a perfect washing as time goes by.
• Reference bar section with bar that moves up and down according to glass sizes (checked at the entry of the bed); glass sheet leans only on up and low part, in this way and through neon lamps it’s possible to have a perfect cleaning check on glass sheet surface.
• High speed conveyor (after reference bar section) with specific motoreducer and inverter to park glass sheets and to increase productivity (1 panel 0,7 mq/ 30 seconds).
• Automatic panel coupling/pressing section; high quality coupling, with tolerance to the tenth of a millimetre, through air-suction cups system that takes first glass, and through mechanical stop system that makes glass sheets leveling-squaring; high quality pressing through motorized panels press with BRUSHLESS motor, that works with electric power, to guarantee perfect pressing on all glass surface. conds).
• Electrical and electronic compents are SCHNEIDER-TELEMECANIQUE.

TECHNICAL DETAILS	H1600	H2000	H2500	H3250
Productivity (1 panel/seconds)	45 (30 with high speed conveyor)	45 (30 with high speed conveyor)	45 (30 with high speed conveyor)	45 (30 with high speed conveyor)
MAX GLASS SIZES	1620 x 4500 mm	2020 x 4500 mm	2520 x 4500 mm	3220 x 6000 mm
MIN. GLASS SIZES	180 x 400 mm	180 x 400 mm	180 x 400 mm	180 x 400 mm
GLASS THICKNESS	Inside washer: 3-19 mm (3-40 mm with opening) Inside press: any thickness	Inside washer: 3-19 mm (3-40 mm with opening) Inside press: any thickness	Inside washer: 3-19 mm (3-40 mm with opening) Inside press: any thickness	Inside washer: 3-19 mm (3-40 mm with opening) Inside press: any thickness
Total Weight	4700 Kg	5200 Kg	6200 Kg	8200 Kg
INSTALLED POWER	22 Kw	24 Kw	31 Kw	43 Kw

ELECTRICITY

3 phase/50 Hz/400 V/neutral wire/ground wire

LISEC COSTRUZIONE MACCHINE ITALIA SRL

VIA VALLIO 21A

31050 MONASTIER DI TREVISO (TV)

ITALY

P. IVA 03289430260

TEL +39 0422 898280 TEL-FAX +39 0422 799370

E-mail info@silemeccanica.com