VERTICAL OPEN TOP WASHERS H1300/1600/2000 mm

FEATURES AND TECHNICAL DETAILS:

• Washer body totally stainless steel made (AISI 304, with thickness 3 mm), external and internal frame, components are made of specific materials to avoid rust; all parts of washer with high quality level to guarantee ruggedness, reliability and quality processing as time goes by.
• Pre-washing system (OPTION), with high pressure jets (through two spraying bars and specific nozzles), take off from glass surface a quantity of dirty before brushes action
• Washing stations with one/two/three pairs of nylon cylindrical brushes diameter 130 mm to have perfect washing, each pair of brushes with two spraying bars and specific nozzels; brushes shafts made of stainless steel, bristles bearings are gauged with internal core shaft, to have a perfect rotation moving and avoid fast wear.
• One/two/three stainless steel tanks with pumps, filters (of stainless steel for sucked water), recircle system and overflow valve; prewashing and washing stations are divided by specific stainless steel frames to avoid water contamination and mixing from one tank to the other; resistance to heat water on first tank; cleaning operation of spraying bars is easy through quick assembling/ disassembling system.
• Drying system with high pressure electric-fan and two air knives to guarantee a perfect drying; fan mounted behind the washer; ventilation box soundproofed with sound absorbent material to reduce noisiness (under 80 dB); with interception valve that stops air flow if glass is not passing through drying section; fan with repleaceable filter.
• Automatic version APAM (OPTION); motorized opening system to work glass thickness up to 40 mm (25 mm for glass sheets with height that exceeds washing plane heights), the internal front part of washer (brushes, rolls and air-knives) goes ahead/back according to glass thickness size, that is set, to have a perfect washing and drying; control panel with regulation of working speed and washer opening (glass thickness that can be worked); brushes with diameter 150 mm for perfect washing; PLC with specific software that optimizes working phases and consumptions, with self-diagnosis system, that alerts if there is a trouble and shows precise position of breakage, so troubleshooting is easy and fast; all motors (brushes, transport rolls, opening system) are positioned on upper part to avoid any water leaking; springs mechanical adjusting system on transport rolls according to the glass thickness that is worked, to have a better quality processing expecially with low-e. glass; further this device is very useful to increase production: you can work, without any change, glass with different thickness of 5 mm; for example adjusting the opening of machine up to 10 mm you can work glass from 10 to 15 mm, machine absorbs different glass thickness, without set all the times the machine with the thickness that you're working.
• Low-E. (soft coated) glass treatment, through soft brushes mounted on front side of the washer (bristles with diameter of nylon of 0,15 mm), harder brushes on back side of washer (bristles with diameter of nylon of 0,30 mm), with specific software that stops transport rolls drive, brushes rotation, pumps water filling if glass stops to not damage the Low-E. glass.
• Entry/exit conveyor with different lengths according to customer requirements, painted iron frame; glass is moved by motorized rollers (of uncuttable rubber, rollers replacement caused by wear is easy and fast) driven by washer, through chain and motoreducer, with inverter to adjust speed; exit bed with lamps to check glass cleaning; glass surface leans on nylon rolls with OR ring of specific material that doesn't scratch glass ore leaves marks or residual parts.
• Machine conforms to CE norms and directives, with specific protections, guards and security devices.
• Inlet water must to be provided with conductivity less than 10 µS, with bigger values we don't guarantee that washer works good, and we suggest a demineralizer plant (reverse osmosis) to have a perfect cleaning of the final product.
  

LISEC COSTRUZIONE MACCHINE ITALIA S.R.L.

VIA AQUILEIA 14

31048 OLMI DI S. BIAGIO DI CALLALTA (TV)

ITALY

P. IVA 03289430260

TEL +39 0422 794111 FAX +39 0422 794191

E-mail info@liseccmi.com